Inputs Passive Bass Input Impedance 2Meg Ohms / Signal range 50mV to 10v (peak to peak)
Active Bass Input Impedance 100k Ohms / Signal range 100mV to 20v (peak to peak)
Effects Return 1 Impedance 50k Ohms / Signal level switchable between +4 and -10dBv
Effects Return 2 Impedance 50k Ohms / Signal level variable between +4 or -10dBv
Outputs Effects Send 1 Impedance 10k Ohms / Nominal level switchable to +4 or -10dBv
Effects Send 2 Impedance 10k Ohms / Nominal level variable between +4 and -10dBv
Line Out (L&R) Impedance 4k7 Ohms / Signal level nominal 0dBv, max +8dBv
High Pass (L&R) Impedance 1k Ohms / Signal level nominal 0dBv, max +8dBv
Low Pass (Mono) Impedance 1k Ohms / Signal level nominal 0dBv, max +8dBv
DI (Pre EQ) Impedance 600 Ohms balanced/ Nominal level 600mv (peak to peak)
DI (Post EQ L&R) Impedance 600 Ohms balanced/ Nominal level 600mv (peak to peak)
Tuner Impedance 10k Ohms / Signal level 0dBv
EQ Graphic +/- 15dB at 12 centre frequencies
Pre-Shape 1 +6dB at 50Hz and 2kHz, -6dB at 400Hz
Pre-Shape 2 +5dB at 100Hz, +3dB at 3kHz and -5dB at 650Hz
Crossover Variable between 250Hz and 1kHz
Frequency Response -3dB at 22Hz and 25kHz
Signal/ Noise Ratio Better than 80dB (EQ flat, mid out)
Distortion Less than 0.05% THD
Power Requirements 230/115v switch selectable at 20VA
Dimensions W482mm / H90mm / D260mm
Output Stage 2 channel Solid State
Output Power 300+300 watts RMS / 1200 watts peak
Output Impedance 4 Ohms
Dimensions H195mm / W530mm / D430mm
Weight 25.6Kg
Eine Bedienungsanleitung kann ich leider nicht finden. Es müsste aber alles klar sein. Wenn Du konkrete Fragen hast, dann stelle sie.
Gruß Uwe
